|
|
|
This is a listing of the materials needed to build the Eider double.
|
Material |
Size |
Quantity |
|
Plywood (okoume) you will need 1 sheet less for the open cockpit version. |
4mm x 49 1/4"(1.25m) x 98 1/2"(2.5m) |
4 sheets 3 for the open |
|
Copper wire |
18 gauge |
100 feet |
|
Epoxy |
Gallon kit (1gallon epoxy, 1/2 gallon hardener) |
2 kits |
|
Wood flour to thicken epoxy |
Fine sanding dust or other filler material |
1 lb. |
|
Fiberglass cloth |
4oz x 32"wide (min) |
12 yards |
|
Fiberglass tape |
9oz x 3"wide |
48 yards |
|
Wood strips (option for double cockpit version) |
1/4" x 3/4"x 2" long (pine) 1/8" x 3/8" x 7 feet (ash, oak or mahogany) |
200 strips 10 strips |
|
Hardwood (optional for home made hardware) |
1"x 6"x 7 feet (ash, oak or mahogany) |
1 board or equivalent |
|
Marine Spar Varnish (or paint) |
With UV protection |
2 quarts |
|
Minicell foam (seat) (backrest) |
16" x 16"x 3" 12" x 8" x 1" |
2 blocks 2 blocks |
|
Water proof contact cement |
1 oz. |
|
|
Nylon rope (safety lines, lifting rope, etc) |
1/4" |
20 feet |
|
Bungee cord (deck lines) |
1/4" or 5/16" |
20 feet |
Updated on February 2, 2010
by Shearwater Boats
Please send questions or comments to:
or call (207) 386 - 0129 or write to us at:
83
Captain Perry Drive
Phippsburg, Maine 04562
All Rights Reserved No part of this page may be used without the permission of Shearwater Boats